rataye-up fuska samar line
| Na'ura mai nadawa ta atomatik ma'aunin fasaha | |
| A'A. | asali siga |
| 1 | kwance tsaye |
| 1.1 | unwind tsayawa yawa: 2 |
| 1.2 | maxi. raw takarda diamita: ≤1650mm |
| 1.3 | raw takarda shaft: yi amfani da 3-inch shaft + 6-inch shaft hannun riga |
| 1.4 | canza launin takarda: manual |
| 1.5 | jagorar takarda: manual |
| 1.6 | Passby ta takarda: Babban wucewa |
| 1.7 | Yanayin tuƙi: tuƙi + bel (Lokacin farawa na al'ada da tsayawa, ɗanyen takarda ba ya zamewa kuma takarda ba ta lalace) |
| 1.8 | raw takarda loading Hanyar: loading ta Silinda |
| 1.9 | Daidaitaccen gefen takarda: Lantarki da na hannu, tsarin daidaita amfani da dual |
| 1.10 | Kula da tashin hankali na takarda: tsarin kula da tashin hankali ta atomatik |
| 2 | nadawa naúrar |
| 2.1 | saurin ƙira: 120m/min |
| 2.2 | Gudun aiki: 100m/min |
| 2.3 | nuni gudun: m/min |
| 2.4 | takardar saitin: 3 plys: 50-600 zanen gado ko 150-1800 plys |
| 2.5 | Haƙuri takarda: ± 1 zanen gado |
| 2.6 | Hakuri daidai gwargwado gefen takarda:≤2mm |
| 2.7 | haƙuri tsawon takarda:≤±2mm |
| 2.8 | takarda yadawa: Sanye take da danyen takarda yada abin nadi (nadi ne mai lankwasa roba yi, tsakiyar tsawo ne daidaitacce) |
| 2.9 | Tsarin rabuwar takarda: Rabuwar takarda ta atomatik |
| 3 | Rukunin Embossing-na zaɓi |
| 3.1 | model: karfe zuwa ulu, karfe zuwa roba, karfe zuwa karfe |
| 3.2 | Drive: Motar mai zaman kanta (ikon inverter), Motar zuwa abin nadi ta hanyar watsa bel na aiki, nadi karfe zuwa abin nadi na karfe ta hanyar watsa kaya |
| 3.3 | Abubuwan da ake buƙata na Gear: Kayan aikin helical biyu (hardness HRC55) |
| 3.4 | Taurin karfe yi: Surface HRC60, chromium plated |
| 3.5 | Canjin nadi na Karfe: Za a iya tarwatsa nadi ɗaya da kansa, mai sauƙin sauyawa |
| 3.6 | Yanayin abin nadi na karfe: Silinda |
| 4 | tsarin fitarwa |
| 4.1 | saurin ƙira: 5 logs / min |
| 4.2 | Gudun aiki: 3 logs / min |
| 4.3 | fitarwa: lebur bel |
| 4.4 | Yanayin sarrafawa: Motar mitar mai canzawa |
| 4.5 | bel kayan aiki: PVC/PU |
| 5 | atomatik jujjuya tsarin |
| 5.1 | saurin ƙira: 5 logs / min |
| 5.2 | Gudun aiki: 3 logs / min |
| 5.3 | jujjuya iko: Silinda |
| 5.4 | watsa: lebur bel |
Ku rubuta sakonku anan ku aiko mana
